Forum Replies Created

Viewing 30 posts - 1 through 30 (of 33 total)
  • Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Thank you very much, it worked.

    Regards,
    Lars Schellhas

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    This Problem still exists.
    Wouldn´t it be possible to Change the Icon used as mobile menu to something else, since VC simply seems to deactivate all MNKY Vector Icons?
    A Pixel graphics, a local svg or a Icon by visual Composer?
    Could you tell me, where I should Change the Code for this?

    Best Regards

    Lars

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello,

    I´m willing to wait for an answer that helps. And yours does.
    In combination with the css-properties from above it´s just perfect.

    Thank you very much – well done.

    Best Regards,
    Lars Schellhas

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hey,
    the code works (except in MS Edge & IE, but seems like they are working on it). Thanks for that. 😉

    Unfortunately (for me probably) I would like to show the category a little bit bigger than the image is, because WP loads a 143×215-thumbnail (e.g. http://www.leihes.de/wp-content/uploads/2016/02/5304-Menuegabel-Hepp-Ecco-143×215.jpg). It would be much better if it simply would load the 300×300 or 350×370 thumbnail. Do you have an idea, how to work this out?
    If not, thank you anyway – you helped me a lot (didn´t knew the object-fit/object-position properties yet).

    Best Regards,
    Lars

    P.S.: I restored the custom.css from today´s backups. Everything´s finde. 🙂

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Further more you have deleted my complete custom.css-file… -.-

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello,
    well, to be honest, this is not what i wanted.
    The pictures should not be stretched, but cropped. – Like the pictures of products are on the shop-page.
    Is there any possibility to do this?
    Best Regards

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Perfect! Didn´t thought about that, because of the option in Legenda.
    Everything´s perfect now.

    Best Regards from Aachen

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    If anyone else is facing this issue, here is the solution:

    If you have more then 10 Variations, WooCommerce will Change the way it loads your Variation-Content because of performance-reasons.
    If you want to Change this Limit simply have a look at this more detailed post:
    https://wordpress.org/support/topic/24-handling-for-20-variations?replies=1

    And use this Code in your themes functions.php: https://gist.github.com/claudiosmweb/6f91ad228c2176b986b2

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Okay, I will. Thank you anyway for your effort to help. I really appreaciated it.
    Thanks and have a nice day!

    Best Regards,

    Lars

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    I see that this is not a Problem of your theme… but maybe you have an idea anyway – maybe only where to look for the error in the Code

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Okay, now we get to the Point of our misunderstanding.
    I´ve created all combinations that you can order.
    The Problem is that on this single product you can choose combinations with the drop-downs, which do not exist.
    On ALL OTHER products you only can choose combinations, which I created.
    Take this for example: http://www.festglanz.de/produkte/runde-tischdecke-aus-burlington-stoff/
    If you take a look on what you can choose in the Dropdowns, you will see that there are 3 “Farben”, 6 “Durchmesser” and 2 “Weitere.
    But as soon as you choose e.g. one of the 3 “Farben”, the other Dropdown are reorganized.
    E.g. if i choose “Farbe” to be “creme” there are only 2 of the earlier 6 “Durchmesser” left.
    Because of this you can never choose a combination which I´ve not created.
    This works fantasticly since the beginning on all products – with one exception: The product vom above: http://www.festglanz.de/produkte/elastanbezug-fuer-stehtisch/

    Best Regards,

    Lars

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello,
    well ok, then it´s probably not a Problem with your theme.. maybe you can help me anyway?
    I´m afraid that the “110” wasn´t the Problem. I completely deactivated “Höhe” for variations now (because there is only the value 110 for all). But the Problem remains.
    Seriously, I cannot find any difference to any of all the other WORKING products… This is so creepy.

    Regards,

    Lars Schellhas

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Well that is sad.. But okay 😉
    Thanks anyway!

    Best Regards,

    Lars Schellhas

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello @Eva Kemp,

    I deactivated Nice Scroll and it´s working now on My mobile phone. But I really would like to use Nice Scroll. Isn´t there a possibility to deactivate it only on mobiles? Thanks.

    Best Regards,

    Lars

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello Robert,

    thank you. It´s fine again!
    Have a nice day!

    Best Regards from Aachen to London,

    Lars

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Sure. Here are two Screenshots. One of the widget and one of the main-cart-page.

    http://www.festglanz.de/Unbenannt.JPG
    http://www.festglanz.de/Unbenannt2.JPG

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Works like a dream! Thanks!

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello @Jack Richardson,

    I think you misunderstood me. My product has like 4 propertys with multiple values to choose.
    Not every combination is a Variation. So normally, if I choose the first property, e.g. the Color, to be “red”, in the other property-drop-downs it Shows only the values which are in variations, which have as Color “red”.
    But instead of this – only on this specific product like it seems – it Shows all values in the Dropdown. No matter there are variations with that combination or not.

    This one works just fine: http://www.festglanz.de/produkte/runde-tischdecke-aus-burlington-stoff/

    And this doesn´t: http://www.festglanz.de/produkte/elastanbezug-fuer-stehtisch/

    Best regards and thanks for the Support.

    Lars

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello Jack,

    thanks for your answer. This solved the Problem.
    But now I have another Problem with My variables :/
    On the same product, which had Problems before I deleted the files, there is the dropdown-Variation-Switch not working properly.
    Instead of only showing me possible combinations, after I´ve Chosen the first property, it Shows all entries for all propertys. So you often get a message like “This Variation does not exist. Please choose another combination.”

    Do you have an idea, how to solve this? On other variable it works just fine..

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    I have the same Problem on my Website!
    I tested with the Internet Explorer of the Nokia Lumia 630.

    Please, contact administrator
    for this information.
    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    I have the same Problem on My site – WITH the new updated Theme…

    It seems like this Problem only occurs on a single product of mine with this error:

    Warning: Invalid argument supplied for foreach() in /homepages/17/d582732901/htdocs/wp-content/themes/legenda/framework/theme-functions.php on line 3147
    
    This product is currently out of stock and unavailable.

    But you can see it by yourself. Login and the link to the product are in the private Content.

    Please, contact administrator
    for this information.
    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello Jack,

    yes I know… I just reverted back and None of My Problems remained.
    So thank you for your quick answer and maybe you can use My post for Troubleshooting for your next theme-version.

    Best Regards,

    Lars Schellhas

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Please update the theme on my page 🙂

    Data in private content.

    Please, contact administrator
    for this information.
    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Okay, now I got it to work. The problem was, that if I choosed the one-half-column, It didn´t worked, because the sidebar needed space too.
    So the columns refer their width by the complete page. Maybe a problem you could work on? 🙂

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello,

    I found this options earlier, but wether I use them or write the code by myself it doesn´t work.
    Could you try to build it on the site above?
    If it works then, I can have a look on what you did and what I maybe did wrong.

    Regards,

    Lars

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Yes. I just wanted to share the working information with you and all other.

    Regards, Lars

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello Mrs. Kemp,

    thank you for your help, but your code does not really work..
    Especially because I wanted to make the logo in the fixed header smaller.

    Now I used the direct CSS-path of the logo by my browser. For me this works:
    body > div.wrapper > div.fixed-header-area.visible-desktop.fixed-already > div > div > div.span3.logo > a > img {width: 100px !important;}
    If you now have a look on my site, you probably understand what I meant.

    Regards,

    Lars Schellhas

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Your own. 8theme.com 😉
    It you are at the top the logo is big. It you scroll down its smaller 😉

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello again,

    thank you for your fast and good answers every time.

    Wouldn´t it be interesting for you, to get mostly translated files by your community in their motherlanguage, would it? You could provide it to your customers. We, or especially I at the moment, would be much more happier. 😀

    Thank you for the information about the Mail-Settings.

    Regards,
    Lars

    Avatar: Lars Schellhas
    Lars Schellhas
    Participant

    Hello Mrs. Kemp,

    okay, so I have to translate the complete file by myself?
    Would be cool, if there would be a pool of translations for your themes.

    Yes, absolutely right. I would like to edit this mail.
    How can I do this?

    Regards,

    Lars

  • 1 2
    1–30 of 33 posts
Viewing 30 posts - 1 through 30 (of 33 total)