Problem with link in Logo in lower resolution

This topic has 9 replies, 3 voices, and was last updated 7 years, 4 months ago ago by Jack Richardson

  • 8 Answers
    Avatar: Eva
    Eva Kemp
    Support staff
    December 13, 2016 at 12:34

    Hello,

    Please provide your site url and FTP access.

    Thank you.
    Regards,
    Eva Kemp.

    Avatar: Unionfor Web
    Rodrigo
    Participant
    December 13, 2016 at 16:16

    Hello good afternoon,
    Below is the private information below as requested.

    Best regards,
    Rodrigo Macedo

    Please, contact administrator
    for this information.
    Avatar: Unionfor Web
    Rodrigo
    Participant
    December 13, 2016 at 16:20

    I forgot to tell you that the page where the test was done where it was also changed was the following “magazine.html”, so to do the same test below follow the link on the page to get easier:

    http://brasilcar.unionforwebdesigner.com/magazine.html

    Best regards,
    Rodrigo Macedo

    Avatar: Jack Richardson
    Jack Richardson
    Support staff
    December 13, 2016 at 20:51

    Hello,

    Sorry, but I couldn’t replicate the issue. Logo is clickable at the place where it’s located. Could you please describe with more details how to replicate the problem?

    Best regards,
    Jack Richardson.

    Avatar: Unionfor Web
    Rodrigo
    Participant
    December 14, 2016 at 14:39

    Hello good day,
    Let’s go, so you better understand the problem I picked up a website where you can perform the test in other screen resolutions, below the site link:

    http://www.comofazerumsite.com/design/testar-resolucoes-de-tela.html

    Take the test using 1024×768 resolution because that’s when the menu becomes mobile menu (test with this page: http://www.brasilcar.unionforwebdesigner.com/magazine.html), you will see that the Logo will be Centralized in this resolution and in the space that is between the menu and the Logo there is a link, that would be the link that is in the Logo.

    Does that make the question any clearer?

    Best regards,
    Rodrigo Macedo

    Avatar: Jack Richardson
    Jack Richardson
    Support staff
    December 16, 2016 at 17:42

    Hello,

    Please add this code in style.css file:

    #logo{
        display: inline-block;
        transform: translateX(50%) !important;
        margin-top: 0 !important;
    }

    Best regards,
    Jack Richardson.

    Avatar: Unionfor Web
    Rodrigo
    Participant
    December 19, 2016 at 13:06

    Hello good day,
    Sorry for the delay, I made the changes as reported and it was great, now the link in the logo is only in the logo and not in the blank area as it was before.

    I just had to make some more changes in CSS to adjust his position but that’s less.

    Thank you very much for the solution and help.

    Best regards,
    Rodrigo Macedo

    Avatar: Jack Richardson
    Jack Richardson
    Support staff
    December 19, 2016 at 20:16

    Hello,

    You’re welcome.

    Best regards,
    Jack Richardson.

  • Viewing 9 results - 1 through 9 (of 9 total)

The issue related to '‘Problem with link in Logo in lower resolution’' has been successfully resolved, and the topic is now closed for further responses

We're using our own and third-party cookies to improve your experience and our website. Keep on browsing to accept our cookie policy.